Spectroscopy and Spectral Lines

Editor: Ian Czekala

This glossary, a continual work in progress like our other glossaries, aims to provide the context necessary to understand much of the spectral jargon in scientific papers on the arXiv. This page will give an overview of how spectroscopy works and what spectral lines are frequently observed by astronomers. In the future, look for more information on how spectral information is taken across the electromagnetic spectrum as well as more information about spectral lines important for diagnostics of certain astrophysical phenomenon.

It is not an exaggeration to state that a large part of astronomical knowledge would have gone undiscovered if it were not for the optical spectrograph. Now, modern spectroscopy techniques work across the electromagnetic spectrum and many important discoveries are being made in regimes previously closed to astronomers, such as the radio, submillimeter, infrared, and x-ray.

Spectrographs

Spectroscopic observational techniques transform the light from an astronomical source into its components, so that we may observe the intensity of the source as a function of wavelength (or frequency, or energy, or temperature, depending on which regime of the E&M spectrum one is in and what the convention is). In practice, this is accomplished via different methods depending on which regime one is observing, however, the principle is the same. To begin, we will describe the optical spectroscope, since it is the most familiar. In the future, look for more information on different kinds of spectroscopes.

If you’ve ever played with a prism before, you have seen how a piece of glass can split light into its various wavelengths, because the index of refraction of the glass of the prism has a wavelength dependence. Thus, red light (the longest wavelength) is bent the least while blue/indigo light (shortest wavelength) is bent the most. If you project this onto a screen (like Newton did), you will see a spectrum. Alternatively, if you’ve ever studied Young’s Double Slit experiment, you might know that light can be split into its components by interference. Diffraction gratings are collections of many slits that act to disperse the light much more cleanly than just two slits, and therefore are used frequently in astronomical spectrographs. Note that with diffraction gratings, red light is dispersed more than blue light, the opposite of prisms. Many modern dual capability imaging spectrographs use grisms, which combine a transmission grating and prism so that a central wavelength of light passes through the grism in a straight line. This allows for high throughput as well as makes it easy to remove the grism and perform imaging of the science target in addition to spectroscopy.

Spectral Lines

Atoms and molecules can emit and absorb radiation at distinct wavelengths, causing the appearance of spectral lines. When acquiring a spectrum of an astronomical object, astronomers rely upon spectral lines to determine a myriad of physical properties, such as composition, temperature, ionization state, velocity, redshift and more. In this section, we will cover the basics of how these characteristics can be determined from spectral lines, with more subsections to be added with time.

For a more thorough introduction to the quantum mechanical treatment of how and why spectral lines are formed, look for an upcoming glossary edited by Tanmoy Laskar, or see Griffiths Quantum Mechanics referenced at the end of this post. This section will mostly be phenomenological.

Atomic transitions of hydrogen

The energy levels of the hydrogen atom are described by just one number, the principle quantum number n. The Rydberg formula provides a useful means for calculating the wavelength of a photon resulting from a transition between the initial and final energy levels, n_i and n_f, respectively,

\frac{1}{\lambda} = R \left ( \frac{1}{n_f^2} - \frac{1}{n_i^2} \right )

where R = 1.097 \times 10^7 \rm m^{-1}

As you may remember from intro physics, if a transition occurs from n_i to n_f = 1, then it is part of the Lyman series, if n_f = 2 then it is part of the Balmer series, and if n_f = 3, then it is part of the Paschen series. Additionally, there are names for larger n_f too. If n_i > n_f, then a photon will be emitted and we will see an emission line. Alternatively, if n_f > n_i, then a photon will be absorbed by the atom and we will see an absorption line.

Historically, astronomy started as an optical science (for obvious reasons) and even today, optical observations are vitally important to astronomers. Therefore, the Balmer series is very frequently invoked in observations, because it primarily covers the optical wavelengths. Astronomers have taken to labeling the Balmer series of transitions with Greek letters. For example, the n_i = 3 to n_f =2 is called H\alpha; the n_i = 4 to n_f =2 is called H\beta; the n_i = 5 to n_f =2 is called H\gamma, and so on up through the Greek alphabet. One could also alternatively call H\alpha the \rm Balmer~\alpha transition, but when one states H\alpha it as assumed they are referencing the Balmer series.

Likewise, the Lyman and Paschen series are named by Greek letters as well. \rm Lyman~\alpha is the n_i=2 to n_f =1 transition, while \rm Paschen~\beta is the n_i = 5 to n_f = 3 transition. The Lyman series covers primarily ultraviolet wavelengths and the Paschen series covers primarily infrared wavelengths.

Tabulated wavelengths for first few transitions

Line Wavelength (Angstroms (10^{-10}\rm m))
Lyman Series
\rm Ly\alpha 1216
\rm Ly\beta 1026
\rm Ly\gamma 973
\rm Ly\delta 950
Lyman limit 912
Balmer Series
\rm H\alpha 6563
\rm H\beta 4861
\rm H\gamma 4340
\rm H\delta 4102
Balmer limit 3646
Paschen Series
\rm Pa\alpha 18700
\rm Pa\beta 12800
\rm Pa\gamma 10938
\rm Pa\delta 10049
Paschen limit 8200

Please note that the agreement of these wavelengths listed in the table might not be exactly what one would obtain via the Rydberg formula, but they are close, and for quick calculations it is good enough to use the Rydberg formula. These differences arise from quantum mechanical effects such as fine structure, the Lamb shift, and hyperfine structure. For more information, please see the texts by Griffiths or Bransden and Joachain in the references below.

Here we have talked about emission and absorption lines from hydrogen, the simplest atom in the universe. Of course, there are characteristic lines from many-electron atoms, such as oxygen, nitrogen, neon, iron, and practically every other element. Additionally, molecules also emit characteristic molecular lines that can be used to trace dense clouds, for example 13CO, carbon monoxide with the isotope 13C.

Line profiles

A great deal of information can be extracted by detailed examination of spectral lines, such as redshift, radial velocity, expansion velocity, temperature, and much more. This section will grow as more authors cover particular spectral methods that appear in the literature.

References for More Information:

General Astronomy Methods

  • Astronomy Methods, by Hale Bradt
  • Astrophysical Techniques, by C.R. Kitchin
  • Handbook of CCD Astronomy, by Steve Howell

Interpreting Spectroscopic Data

  • Interpreting Astronomical Spectra, D. Emerson
  • Stellar Spectral Classification, Richard O. Gray and Christopher J. Corbally
  • Spectroscopy of Astrophysical Plasmas, A. Dalgarno and D. Layzer

Interstellar Medium Spectroscopy and Processes

  • Physics of the Interstellar and Intergalactic Medium, Bruce T. Draine

How Spectrographs Work

  • Astronomical Spectrographs and their History, by John Hearnshaw
  • Astronomical Optics, by Daniel J. Schroeder
  • Astrophysical Techniques, by C.R. Kitchin, Chapter 4

Spectroscopic Observation and Reduction Techniques

Quantum Mechanics

  • Introduction to Quantum Mechanics, by David J. Griffiths, 2nd edition
  • Physics of Atoms and Molecules, by B.H. Bransden and C.J. Joachain, 2nd edition
Advertisements

Discussion

7 thoughts on “Spectroscopy and Spectral Lines

  1. There’s an AstroBetter wiki page on Spectral Analysis Tools. It’s a stub at the moment, but it at least lists the various reduction and analysis packages.

    There’s also a stub on Long-Slit Spectra Reduction.

    And links to info about specific spectrographs (e.g., NIRSPEC, GMOS, TripleSpec) are listed on the Observing page.

    As you learn about new tools and instruments, and there pros and cons, please consider sharing your knowledge by updating these pages!

    Posted by Kelle Cruz | April 12, 2011, 8:41 am

Trackbacks/Pingbacks

  1. Pingback: New Astrobites Glossary: Spectroscopy and Spectral Lines « astrobites - April 7, 2011

  2. Pingback: BOSS’s 3D map of the early universe « astrobites - May 2, 2011

  3. Pingback: Finding Filaments: Identifying How Gas Flows into Galaxies « astrobites - June 5, 2011

  4. Pingback: The Sun: A Spectroscopist’s Delight « astrobites - June 9, 2011

  5. Pingback: Reconstructing the Past: Metallicity Abundances in Dwarfs « astrobites - June 18, 2011

  6. Pingback: Investigating stars like our Sun using asteroseismology « astrobites - August 17, 2011

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

Enter your email address to get email updates from Astrobites.

Join 118 other followers

Our sister site

Advertisements
%d bloggers like this: